1 / 6
Customizable Aerofoil Fan Rotor on Display Stand - Real NACA Blades — image 1
1 / 6

Customizable Aerofoil Fan Rotor on Display Stand - Real NACA Blades

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Parametric 7-blade fan rotor, real NACA 4412 aerofoil, pitch and twist - on a two-post desk stand. One command.

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
15
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

A proper aerofoil fan rotor for your desk - real twisted NACA-section blades, not flat paddles - on a clean two-post display stand. The whole rotor is generated by ONE native TrueGeometry Playground command (/aerofoil fan), and blade count, chord, span, pitch, twist and hub size are all variables.

WHAT YOU GET

- 7-blade rotor (~100 mm tip diameter), NACA 4412 section, 32 deg pitch, -16 deg twist

- Display stand: 90 x 46 mm base, two posts, cross-axle - the rotor hub slides on and free-spins by hand

- The full recipe (attached .txt) with all variables at the top

MAKE IT YOURS (this is the point)

Open the free TrueGeometry Playground (link below), click Script, paste the recipe, change a line, click Run. Presets: 5-blade wide chord, 9-blade quiet fan, symmetric NACA 0012 jet-fan look. Try any NACA 4-digit code.

HONEST NOTES

- DISPLAY PIECE, not a working fan - it is not balanced for a motor. Do not power it.

- Not yet test-printed. If you print one, please post a Make and tell us what to fix.

- Parts embed into each other by design. Do NOT union the shells - your slicer merges the overlaps.

- AI-assisted design, checked numerically in the Playground (collision check: no flags).

PRINTING

PLA is fine. Print the rotor flat on the hub face with supports under the blades (or split and pin); the stand prints as oriented, no supports. Hub bore is modeled at axle size - drill out lightly if tight.

FILES

- SpinFanRotor_100mm_Assembly.stl = the main model

- Part_*.stl = rotor, base, posts and axle separately

- SpinFanRotor_100mm_recipe.txt = the full Playground recipe

- SpinFanRotor_100mm_Playground_Guide.pdf = how to run + customize, with preset cards

Blog article (technique, presets, FAQ): https://blog.truegeometry.com/0_0_0_0/blogs/post-76715029.html  

Run it in the Playground: https://www.truegeometry.com/CoreWebGLTG/KBEAgentHTTP.html 

License: CC BY 4.0 - print it, remix it, sell your prints, just credit TrueGeometry.