1 / 4
Menger Sponge Christmas Ornament - 8,000 cubes, tunnels inside tunnels (no supports) — image 1
1 / 4

Menger Sponge Christmas Ornament - 8,000 cubes, tunnels inside tunnels (no supports)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A 60 mm level-3 Menger sponge ornament: 8,000 tiny cubes, with square tunnels at three sizes running straight through it

Rating
0 / 5
Likes
0
Downloads
4
Makes
0
Views
11
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Hold it up to a light and you can see straight through it, in three directions. A Menger sponge starts as a cube. Cut it into 27 smaller cubes, then take away the one in the middle and the six in the middles of the faces. Do the same to each of the 20 cubes left, and then again. This ornament is level 3: 8,000 cubes of 2.2 mm, with square tunnels of 2.2, 6.7 and 20 mm running all the way through.

Maths fact: Karl Menger described the sponge in 1926, and every face of it is a Sierpinski carpet. Each level keeps 20/27 of the volume but adds surface. This one has 41 % of a solid cube's volume and 4.1 times its surface area. Taken to infinity, the sponge would have no volume at all and an infinite surface.

How it was made: we generated the sponge with Curiosa Shapes, the parametric shape tool for 3ds Max that Curiosa Tools is building. It builds the sponge from the exact rule (on a 27 x 27 x 27 grid, a cube stays unless two of its coordinates have a 1 in the same base-3 place) as one clean, watertight mesh, so every hole is exactly where the maths puts it. We then added a 3 mm hanging tab across the top opening and checked the file layer by layer for a 0.4 mm nozzle. Curiosa Shapes is in development; you can see it, and try the shape engine in your browser, at https://curiosa.tools/?via=pr



It is a 60 mm cube, 74 mm tall with the tab. The 4 mm hole takes a thread, a narrow ribbon or an ornament hook.

The pictures are renders of the exact model file.

Files
- menger-sponge-ornament-60mm.stl - the ornament, one closed solid, ready to slice (tab up)

Made with Curiosa Tools - https://curiosa.tools/?via=pr

Tags