1 / 3
ESP32 S3 (ESP32-S3-DevKitC-1) Round Enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A round enclosure for ESP32-S3-DevKitC-1 boards
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A round enclosure for ESP32-S3-DevKitC-1 style boards (with two USB C ports).
The boot and reset buttons aren't accessible but if you're using ESPHome or another over the air update implementation that is unlikely to be an issue.
4 x M3 round head screws between 6mm and 10mm required for assembly.
I printed in PETG as the enclosure has minimal venting and ESP32 devices can get warm, particularly with high workloads.