Fingerboard Ramp Set - Quarter Pipe, Kicker, Ledge and Stairs Mini Skatepark, No Supports (OpenSCAD)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mini skatepark for finger skateboards: a quarter pipe with coping, a kicker, a grind ledge and a three-stair set.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 36
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A mini skatepark for fingerboards: a quarter pipe with a coping rail on the lip, a kicker ramp, a long grind ledge and a three-stair set. Everything is the same width so you can line the pieces up into a park.
DETAILS
• 60 mm wide; quarter pipe 50 mm tall, kicker 16 mm, ledge 120 mm long, stairs 21 mm tall.
• Prints with no supports: every piece stands upright as a profile, so the curves and slopes face up, and the coping is set into the deck.
• Bambu Studio: 2 h 14, 80 g for the set. Sand the ramp faces lightly for smoother rolls.
CUSTOMIZE (OpenSCAD)
Ramp width and quarter pipe radius.