Universal 40 mm Aluminum Extrusion Clips & Customizable Number Signs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Universal snap-on clips & customizable number signs for 40mm ITEM aluminum extrusions, profiles, carts & workshop use.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 38
- Makes
- 0
- Views
- 72
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
At work, we use several identical rolling carts made from 40×40 mm and 40×80 mm aluminum extrusions (ITEM profiles). Since all of these carts look exactly the same, I designed these signs to give each cart a clearly visible number, making them easy to identify and tell apart.
Each sign consists of two clips and the actual number plate. The parts are printed separately and simply snapped together afterwards. Once assembled, the complete sign can be clipped onto any 40 mm aluminum extrusion, where it stays securely in place thanks to its form-fitting design.
More Than Just Number Signs
Although I originally designed these clips for the numbered signs shown here, the same mounting system can be used for many other applications. Basically, wherever you want to attach something to a 40 mm aluminum extrusion, these clips can serve as a simple and reusable mounting solution.
The peg-and-socket connection was intentionally kept simple, making it easy to design your own compatible attachments. Possible applications include cable holders or cable guides, switches, small control elements, labels, signs, brackets, holders, and many other accessories.
Smaller attachments may only require one clip instead of two. You could even add text or symbols directly to a single clip rather than attaching a separate sign, allowing for much smaller and more discreet labels on the extrusion.
So feel free to use the clips as a starting point for your own designs and adapt the mounting system to whatever you need.
I’m providing the signs I have already created, numbered 1–13, as well as a blank sign in STEP format, so you can easily customize it with your own numbers, text, or labels.
Printing Recommendations
The clips should be printed on their sides so that the layer orientation can better withstand the forces that occur when the clips flex during installation and removal. See the included photo for the recommended print orientation.
The sign itself should be printed flat, with the text facing upwards. A simple manual filament change can be used to print the lettering in a contrasting color.
I printed all parts in PLA, which worked very well. However, if you plan to attach and remove the signs frequently, PETG is recommended because its greater flexibility makes it better suited for repeated flexing.
Important – Tight Tolerances
Please note that the tolerances between the pegs on the sign and the corresponding sockets in the clips are very tight.
Do not use excessive force when assembling the parts, as this could cause the clips to break. If your printer does not produce dimensionally accurate parts, you may need to slightly adjust the models or their scaling in your slicer to achieve the proper fit.
Feel free to leave a comment if you have any suggestions for improving the model. And if you print it, I’d be happy to see your makes and photos :)