Support Shelf Bracket for Magnetic INDX Extended Purge Bin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple support shelf that provides vertical support only for INDX purge bin with magnets
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 3
- Makes
- 0
- Views
- 68
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Open Community License v1.1
Background
I printed the 150mm tall purge bin from @DominikChuchl_135645 and really liked how it fit and functioned however I wanted to be able to have the bin as far up under the discharge hole as I could get it.
I tried the original support hook but found the process of getting the bin in and out over the hook cumbersome and also all of the existing purge bin hooks have their flange sitting behind the bin which prevents the bin from sitting flat against the printers side panel.
My mods allow the support shelf's mounting flange to sit below the purge bin which allows the bin to easily slide in and out horizontally and the magnets are plenty strong to hold it tight against the side of the printer.
Printing
Print the model as oriented on the bed with no supports. It has pockets for m3 nuts like the original but only uses the lower 2 holes in the side panel of the printer.