OpenLock Tile Bases for Death-X Tiles
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are tile base alternatives to the Death-X tile magnetic bases for those who prefer the OpenLock clips.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 32
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props & Terrains
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
OpenLOCK-Compatible Replacement Bases for Cast n Play Death X Tiles
This open-source release provides a 100% support-free mechanical infrastructure for Cast n Play's Death X Tiles, completely replacing native 5mm spherical magnetic alignment adapters with standard OpenLOCK mechanical clip slots. All models feature an open-center perimeter architecture to reduce filament consumption and print times. The tiles bases were tested using Polymaker PLA on a Flashforge Adventurer 5M, with the following settings without support:
.4mm Nozzle - Nozzle Temperature 210C - Bed Temperature 60C - Layer height: 0.2 mm - First layer height: 0.2 mm Walls & Shells - Wall loops: 3 - Top shell layers: 4 - Bottom shell layers: 3 - Top/Bottom surface pattern: Monotonic - Seam position: Aligned Infill - Sparse infill density: 15% - Sparse infill pattern: Gyroid - Internal solid infill pattern: Monotonic Speed - First layer: 50 mm/s - First layer infill: 80 mm/s - Outer wall: 200 mm/s - Inner wall: 300 mm/s - Top surface: 200 mm/s - Sparse infill: 270 mm/s - Internal solid infill: 250 mm/s - Gap infill: 200 mm/s - Travel speed: 500 mm/s Overhangs & Bridges - Slow down for overhangs: Enabled - Overhang speed (10%): 0 mm/s or % (Default) - Overhang speed (25%): 40 mm/s - Overhang speed (50%): 20 mm/s - Overhang speed (75%): 10 mm/s - Bridge speed (External): 25 mm/s - Bridge speed (Internal): 50 mm/s Acceleration - Normal printing: 10000 mm/s² - Outer wall: 5000 mm/s²