Extruder calibrator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wanting to set your esteps for the extruder but don't have a caliper? Do it enough that you keep banging your nice…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 39
- Makes
- 0
- Views
- 599
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Wanting to set your esteps for the extruder but don't have a caliper? Do it enough that you keep banging your nice calipers on the frame? Only have a big thick sharpie and it makes a mark on your filament 7mm wide? Fear not.
Following the link below you'll see extruder calibration is key to proper extrusion. The maths are easy. I even put the M commands on the tool as a reminder.
https://all3dp.com/2/extruder-calibration-6-easy-steps-2/
Print Settings
Printer Brand:
TEVO
Printer:
Tornado
Rafts:
No
Supports:
No
Resolution:
0.16
Infill:
25%
Filament: Any PLA/ABS Any
Category: 3D Printer Accessories