Human heart, airways and pulmonary vasculature
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 3D model of human lungs.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 69
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other 3D Objects for Learning
- License
- GNU General Public License v3.0
Hi, this model is based on a real human chest CT ( the CT is publicly available as a part of the Medical Segmentation Decathlon, Task 06 - Lungs, volume 45), size is 1:1. The model depicts the heart ( without individual chambers), aorta ( without its branches due to a limited size of an MK4 and MK3 print volume), pulmonary arteries, pulmonary veins and the airways.
Since the model was meant to be printable within MK volume, it only has the left part of the pulmonary vasculature and airways. It is made of two parts - the heart and aorta + the stand and the left pulmonary airways + vasculature.
Difficulty - expert!! High risk of print failure!!
I strongly suggest printing with low speeds and acceleration, especially when using a bedslinger printer like MK4 or MK3.
I do not recommend using snug or grid supports, unless you are using soluble supports. Removing them if they are anything else than Organic is nearly impossible ( breaking off the organic ones alone takes already 1-2 hours)
The connecting pins are deliberately smaller than their negative volumes
If you have a bigger printer, like Core One L or Prusa XL, you do not have to print it from two parts, just change the model type from "negative volume" to "part".
The model was was originally segmented for a Czech VR leader Misterine and It4Innovations.
Happy printing!