human lungs- heart, airways and blood vessels
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a detailed model of human pulmonary vasculature and airways
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 81
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other 3D Objects for Learning
- License
- GNU General Public License v3.0
Hi, this is 3D Oberarzt.
Let me introduce probably the most complicated 3D model I have ever attempted to actually print - human lungs, precisely bilateral pulmonary veins, arteries, airways, all connected to the heart as the central part.
It is based on a real human chest CT ( the CT is publicly available as a part of the Medical Segmentation Decathlon, Task 06 - Lungs, volume 089), size is slightly bigger - approximately 1.22 : 1, to make it possible to print.
Difficulty - extreme. High risk of print failure.
This Bad Boy is for Die Hards and Hardcore 3D printing Fans only! Do not attempt to print it without significant previous experience, otherwise you will waste a considerable amount of filaments and time!
I strongly suggest printing with low speeds and acceleration. The model is rather tall, very complex and using too high speed settings will cause layer shifts, or, worse, even print failure.
Do not even try snug or grid supports, unless you are using soluble filaments for them. Removing them if they are anything else than Organic is nearly impossible ( breaking off the organic ones alone takes already 2-3 hours)
The model was originally segmented for a Czech VR leader Misterine and IT4Innovations.
Happy printing!