Field-of-View Restriction Shutters for a Mock VR Headset (HTC VIVE Focus 3)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3D-printed, adjustable shutter assembly that turns a stripped-down VIVE Focus 3 into a “Mock HMD"
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other 3D Objects for Learning
- License
- Creative Commons — Attribution
Studies comparing walking in VR with walking in the real world face a problem: the headset changes two things at once. It shows a virtual world, and it restricts what you can see. This shutter assembly separates the two.
It fits on a VIVE Focus 3 with all electronics and the front shroud removed, so the wearer looks out at the real world through the headset. Adjustable shutters narrow their view to match what they would see wearing the real headset in VR. With weights added to match the original headset’s mass and balance, the Mock HMD restricts vision and loads the head like the real thing, but shows no virtual world.
We used it in research on walking in crowds at the University of Canterbury, New Zealand. It let us measure the effect of the headset’s restricted field of view in the real world, separately from the effect of VR itself.
Setting the shutters
Stand in a fixed position in a room that has a matched virtual replica, wearing the real headset. Note which landmarks on the walls and floor mark the edges of your view.
Put on the Mock HMD in the same position. Adjust the shutters until the same landmarks mark the edges of your view.
Check the setting with more than one person.
What you need
A VIVE Focus 3 headset to strip down. The electronics, including the battery, are removed. This voids the warranty, and the battery must be disposed of properly.
The printed parts: Baseplate, and shutters.
Re-use mounting hardware from the electronic components stripped out.
Weights to match the original headset’s mass and balance, if desired.
Print settings (as printed)
Material: PETG printed in black, to cut down light and reflections, else paint with matte black.
Layer height: [0.2 mm]
Infill: [100%]
Supports: No
Safety: this device deliberately restricts peripheral vision. Use it only in a clear, supervised area, and have someone spot the wearer while they walk.
Citation: If you use this in research, please cite: de Schot, L., Nilsson, D., Lovreglio, R., Lindeman, R. W., & Harding, N. (in prep.). Overground walking with virtual pedestrians: Towards validated VR-based data collection for pedestrian dynamics. Manuscript in preparation.
Licence: CC BY 4.0
Not affiliated with or endorsed by HTC. “VIVE” and “Focus 3” are used only to describe compatibility.
Tags: virtual reality, VR, field of view, FoV, HMD, VIVE Focus 3, research, human factors, gait, walking
Payment
This model is offered up for free. If you choose to use please attribute credit accordingly. If you get use out of this and wish to say thanks, please feel free to buy me a coffee using the QR code in the photos attached, or at buymeacoffee.com/DarthTiberius :)