1 / 6
Glow in the Dark Stars, Moons, Dragons + Zodiac — image 1
1 / 6

Glow in the Dark Stars, Moons, Dragons + Zodiac

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Glow-in-the-dark wall stars, moons, sparkles, dragons, and all 12 zodiac constellations, with NFC tag versions.

Rating
0 / 5
Likes
0
Downloads
3
Makes
0
Views
18
Reviews
0

Updated at source:

Model information

Category
Wall-mounted
License
Standard Digital File License

A full set of glow-in-the-dark wall decorations: stars, sparkles, moons, dragons, all 12 zodiac constellations, and two NFC tag pieces. I made them for the ceiling and walls of a tent hangout, but they work on any wall, ceiling or canopy.

What's included

  • Stars + sparkles: stars in 40, 55 and 70 mm, plus 40 and 50 mm sparkles

  • Moons: cratered moon, rough-edge moon, moon with star cutouts, and a moon with hanging stars

  • Dragons: flying dragon and wrapped dragon, each with a mirrored version

  • Zodiac constellations: all 12, from Aries to Pisces, split over 7 plates

  • NFC tag pieces: a 70 mm star (snooze icon) and a moon (tent icon), each with a pocket for an NFC sticker, plus glow star and moon pieces with blue star inlays

Print profiles

  • All Plates (main): all 12 plates in one file, labeled by part and color

  • Stars, Sparkles + Moons: 2 plates

  • Dragons: 2 plates

  • Zodiac Constellations: 7 plates

  • NFC Tags + AMS Accents: 1 multicolor plate (needs an AMS)

Each plate name says which glow color it's set up for (gold or purple), so you can print one color at a time without swapping filament. The STLs are included too, numbered to match the plates.

Print settings

  • PLA (glow-in-the-dark PLA for everything except the black accents)

  • 0.2 mm layers, 2 walls, 15% infill, no supports

  • Glow filament is abrasive. Use a hardened steel nozzle if you print a lot of it.

  • The constellation lines are only 2 mm wide. Peel them off the build plate slowly and don't bend them.

NFC tags

The NFC star and moon have an internal pocket for a 25 mm round NTAG215 sticker. The print pauses at 1.8 mm: press the sticker flat into the pocket and resume. Write the tag with your phone after printing; it reads through the plastic.

Mounting tips

Before sticking anything:

  1. Wipe the back of each print with rubbing alcohol and let it dry.

  2. Press each piece on firmly for about 30 seconds.

  3. Give adhesive a full day before it has to hold weight.

What to use:

  • Stars and sparkles: 1 Velcro dot each

  • Moons: 2 Velcro dots, one near each end, so they don't spin

  • Dragons: 2 or 3 small squares of industrial Velcro

  • Zodiac constellations: a 1/2 in square of Velcro or tape on 2 or 3 of the biggest stars

  • NFC tag pieces: 1 Velcro dot, somewhere you can reach to tap your phone

On fabric (tents, canopies), use Velcro rather than tape: fabric flexes and pulls tape loose. Don't use super glue or iron-on Velcro on fabric. Super glue is only for repairs, like a snapped dragon tail or a broken string on the hanging-stars moon.

Charging the glow

Glow filament charges from light. Leave the pieces in room light or shine a phone flashlight on them for a minute before bed.

Print profiles

All Plates: full set, 12 labeled plates

Main profile: all 12 plates in one file. Each plate is labeled with what's on it and which glow color it's set up for.

  • Plate 1: NFC tags + blue accents (AMS, 4 colors)

  • Plates 2 to 8: Zodiac constellations, gold and purple

  • Plates 9 and 10: Dragons, gold and purple

  • Plate 11: Stars + sparkles, gold

  • Plate 12: Moons, stars + sparkles, purple

X1 Carbon, 0.4 mm nozzle, PLA. 0.2 mm layers, 2 walls, 15% infill, no supports. The NFC plate pauses at 1.8 mm so you can drop in a 25 mm NTAG215 sticker.

  • Sliced for: Bambu Lab X1 Carbon

  • Plates: 12

  • Print time: about 10 h 0 min

  • Filament: PLA #F330F9 (117 g), PLA #FFF144 (103 g), PLA #76D9F4 (7 g), PLA #161616 (1 g)

  • File: Glow in the Dark Stars, Moons, Dragons + Zodiac - print profile 1 (All Plates - full set, 12 labeled plates).3mf

Dragons: 2 plates, gold + purple

Just the dragons, on 2 plates.

  • Plate 1: Dragons, gold (flying dragon and wrapped dragon)

  • Plate 2: Dragons, purple (the mirrored versions)

X1 Carbon, 0.4 mm nozzle, glow PLA. 0.2 mm layers, 2 walls, 15% infill, no supports.

  • Sliced for: Bambu Lab X1 Carbon

  • Plates: 2

  • Print time: about 2 h 3 min

  • Filament: PLA #FFF144 (26 g), PLA #F330F9 (26 g)

  • File: Glow in the Dark Stars, Moons, Dragons + Zodiac - print profile 2 (Dragons - 2 plates, gold + purple).3mf

Stars, Sparkles + Moons: 2 plates

Just the stars, sparkles and moons, on 2 plates.

  • Plate 1: Stars + sparkles, gold (stars in 40, 55 and 70 mm, sparkles in 40 and 50 mm)

  • Plate 2: Moons, stars + sparkles, purple (cratered moon, rough-edge moon, moon with hanging stars, plus stars and sparkles)

X1 Carbon, 0.4 mm nozzle, glow PLA. 0.2 mm layers, 2 walls, 15% infill, no supports.

  • Sliced for: Bambu Lab X1 Carbon

  • Plates: 2

  • Print time: about 2 h 25 min

  • Filament: PLA #FFF144 (24 g), PLA #F330F9 (44 g)

  • File: Glow in the Dark Stars, Moons, Dragons + Zodiac - print profile 3 (Stars, Sparkles + Moons - 2 plates).3mf

Zodiac Constellations: all 12, 7 plates

Just the 12 zodiac constellations, on 7 plates.

  • Plate 1: Aries + Taurus, gold

  • Plate 2: Gemini + Cancer + Leo, purple

  • Plate 3: Virgo + Libra, gold

  • Plate 4: Scorpius, purple

  • Plate 5: Sagittarius, gold

  • Plate 6: Capricorn + Aquarius, purple

  • Plate 7: Pisces, gold

X1 Carbon, 0.4 mm nozzle, glow PLA. 0.2 mm layers, 2 walls, 15% infill, no supports. The lines are only 2 mm wide, so peel them off the plate slowly.

  • Sliced for: Bambu Lab X1 Carbon

  • Plates: 7

  • Print time: about 3 h 32 min

  • Filament: PLA #FFF144 (31 g), PLA #F330F9 (30 g)

  • File: Glow in the Dark Stars, Moons, Dragons + Zodiac - print profile 4 (Zodiac Constellations - all 12, 7 plates).3mf

NFC Tags + AMS Accents: 1 multicolor plate

Just the NFC tag pieces and the blue-accent pieces, on 1 multicolor plate (needs an AMS).

  • NFC tag star (snooze icon) and NFC tag moon (tent icon)

  • Moon with blue star inlays

  • 70 mm stars in gold and purple, each with a blue accent

The NFC star and moon have a pocket for a 25 mm round NTAG215 sticker. The print pauses at 1.8 mm: press the sticker flat into the pocket and resume.

X1 Carbon, 0.4 mm nozzle, glow PLA plus black PLA for the icons. 0.2 mm layers, 2 walls, 15% infill, no supports.

  • Sliced for: Bambu Lab X1 Carbon

  • Plates: 1

  • Print time: about 1 h 59 min

  • Filament: PLA #F330F9 (17 g), PLA #FFF144 (22 g), PLA #76D9F4 (7 g), PLA #161616 (1 g)

  • File: Glow in the Dark Stars, Moons, Dragons + Zodiac - print profile 5 (NFC Tags + AMS Accents - 1 multicolor plate).3mf

Also on MakerWorld, with one-click print profiles for Bambu Studio: Glow in the Dark Stars, Moons, Dragons + Zodiac

Tags