Big Glow-in-the-Dark Zipper Pulls (Tent & Bag)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Big glow-in-the-dark zipper pulls for tents, sleeping bags, and backpacks. Easy to find and grab in the dark.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 13
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Standard Digital File License
Big, chunky zipper pulls that are easy to find and grab in the dark. Print them in glow-in-the-dark filament and you can find the tent door at 2 a.m. without a headlamp.
I made these for the door zippers on our Kelty Daydreamer 4P tent. The tent's own cord loops thread through the small hole, so they go on without cutting anything. They also work on backpacks, duffels, jackets and sleeping bags.
What cord fits
The cord hole is 4.8 mm through, so any cord up to about 4 mm fits: the tent's factory zipper loops, 2-3 mm accessory cord, or 550 paracord (about 4 mm).
The top of the hole has a 10.5 mm recess, so the knot sits flush instead of sticking out.
A small split ring or a thin zip tie works too.
Features
Large 30 mm finger loop you can grab with gloves on
Each pull is 55 x 72.5 x 8 mm
Teardrop shape, flat on the bed, no supports
Print settings
Included in the print profile.
Filament: PLA (glow-in-the-dark recommended)
Layer height: 0.2 mm
Infill: 100% with 4 walls, so they are solid and hard to snap
Supports: none
How to attach
Thread the cord through the zipper slider.
Pass both ends through the small hole from the bottom.
Tie them off so the knot sits in the recess.
Tips
Charge glow pulls under a bright light or a UV flashlight before bed.
Glow filament is abrasive. Use a hardened steel nozzle if you print a lot of it.
Print profile
0.2mm layer, 4 walls, 100% infill
X1 Carbon, 0.4 mm nozzle, PLA (glow-in-the-dark recommended). 0.2 mm layers, 4 walls, 100% infill, no supports. Solid so the pulls don't snap. Cord hole fits cord up to about 4 mm.
Sliced for: Bambu Lab X1 Carbon
Plates: 1
Print time: about 3 h 24 min
Filament: PLA #FFF144 (162 g)
File: the 3MF labeled "print profile" in Model Files
Also on MakerWorld, with one-click print profiles for Bambu Studio: Big Glow-in-the-Dark Zipper Pulls (Tent & Bag)