La Catrina
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 69
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size. You can change X and Y but Z must remain the same.
You may print at higher layer heights below the Min Depth of 0.48mm
Actual Depth is 2.3mm
Filaments Used:
PLA Aurapol Black
PLA Aurapol White
PLA Elegoo Gray
PLA Aurapol Skeleton white
This print uses 4 unique filaments. Substitute as needed.
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Gray
At layer #13 (1.12mm) swap to Beige
At layer #20 (1.68mm) swap to White for the rest.
Here is the frame
https://www.printables.com/model/1881548-picture-or-photo-frame