1 / 5
Marble Buddy — Cute Creature Marble Run + Desk Organizer — image 1
1 / 5

Marble Buddy — Cute Creature Marble Run + Desk Organizer

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Cute blob creature marble run — press-fit eyes, 2-turn spiral track, clip-on extension, organizer tray.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
4
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

The desk buddy that's also a marble run — now with real eyes. Free.

The Marble Buddy is an original cute blob-creature wrapped in a spiral marble track, sitting in a desk-organizer tray. This version rebuilds the two things the first one got wrong: the eyes are now REAL — separate press-fit pieces you print in white and black — and the spiral is re-engineered so it truly clears the body on its own support posts.

Drop a standard 14mm marble into the entry funnel at the top of the track: it rolls out the funnel's downhill slot, spirals two full turns around the buddy, and drops off the exit into the tray's catch basin. Clip on the extension chute and the run keeps going — the marble falls through the drop hole at its end into a cup you place underneath. Print a second extension and it chains onto the first.

What's in the download

- zilla-marble-buddy-v2-body.stl — the creature: ears, belly, cheeks, mouth groove, hair tuft, and two eye sockets

- zilla-marble-buddy-v2-eye.stl — eye dome with press-fit stem (print 2×, white)

- zilla-marble-buddy-v2-pupil.stl — pupil dome with press-fit stem (print 2×, black)

- zilla-marble-buddy-v2-spiral.stl — 2-turn conical track with entry funnel and 8 support posts

- zilla-marble-buddy-v2-extension.stl — clip-on extension chute with end drop hole (print 1–2×)

- zilla-marble-buddy-v2-tray.stl — 170×150mm organizer tray with catch basin and 3 front pen cups

Measured specs

- Assembled 170 × 150 × 97.1mm · body 83.4 × 65.5 × 90.1mm · tray 170 × 150 × 24mm

- Fits standard 14mm marbles (20mm channel, 15mm funnel throat)

- Eye stems r3.9 into r4.2 sockets, pupil stems r1.7 into r2.0 holes — 0.3mm/side press-fit clearance everywhere

- Z-hex maker's mark engraved in the tray underside

- All 6 files watertight, single solids

Print settings

- 0.2mm layers, PLA or PETG — full kit ≈166g (slicer estimate)

- Body: feet-down; tree supports under the belly dome only (that face sits hidden on the tray platform)

- Spiral: posts-down exactly as oriented; add supports under the longest track spans if your slicer flags them

- Tray: flat, no supports · Eyes/pupils: dome up · Extension: flat as oriented, no supports

Assembly

1. Place the spiral on the tray (posts reach the tray floor around the centre platform).

2. Set the buddy on the platform, inside the spiral.

3. Press an eye into each face socket, then a pupil into each eye. No glue needed.

4. Optional: clip the extension onto the spiral exit and put a cup under its drop hole.

5. Drop a 14mm marble in the entry funnel and watch it run.

Printed it? Post a Make — bonus points for video of the marble run.

---

Want to sell prints of this? The commercial license is on my Cults3D (Zilla's domain — that's where the premium versions live): https://cults3d.com/en/3d-model/gadget/marble-buddy-cute-desk-creature-with-spiral-marble-run

Tags