The Midnight Web Wheel – Halloween Ferris Wheel with Chomping Skulls (crank, no supports)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Turn the bone crank: skulls snap their jaws, coffins pop open, a spider rules the web. Prints without supports!
- Rating
- 0 / 5
- Likes
- 31
- Downloads
- 28
- Makes
- 0
- Views
- 295
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Autumn & Halloween
- License
- Creative Commons — Attribution — Noncommercial
Optional TPU parts
42 – TPU gear keeper band (recommended): a small loop around the fixed axle and the pinion shaft – it keeps the gears engaged so they never skip, and it is hidden behind the ring gear.
43 – TPU belt around both gears (optional, cosmetic): a smooth belt that hugs the ring gear and the pinion.
Print in TPU 95A, slowly (20–25 mm/s). Fit it before mounting the back tower.Beyond seven hills and one very foggy meadow lies the little village of Bonehollow. When the clock strikes midnight on Halloween, Granny Weaverly – the oldest spider in the land – turns her finest web into a Ferris wheel… and the whole graveyard climbs aboard.
Turn the bone crank and watch it come alive
🕸 Spider-web wheel (Ø 189 mm) with sagging, spooky threads
🦴 Real-bone towers and a bone crank – 6:1 gear drive (16 → 96 teeth) for a slow, smooth ride
💀 4 skulls with real hinged jaws – they hang open… until zombie Frank's hand at the bottom snaps them shut: clack!
🎃 2 jack-o'-lantern heads that chomp the same way
⚰ 2 coffins – the zombie hand pushes a pin, the lid lifts and a tiny skull peeks out
🕷 Spider with a glowing skull abdomen on the fixed hollow axle (an LED wire runs through the axle – nothing tangles)
🪦 Graveyard base with tombstones, glowing pumpkins and a mausoleum that holds the crank shaft
✅ Everything prints WITHOUT SUPPORTS
All STL files are already oriented for printing. Ten 3MF plates for a 220 × 220 mm bed are included, grouped by color.
Print info
Tested on Creality Ender-3 V3 KE (220 × 220). The 3MF plates open in PrusaSlicer, Bambu Studio, OrcaSlicer and Creality Print.
PLA, about 240 g in total, about 10 hours of printing
0.20 mm layers for skulls and mechanics, 0.24 mm with 100 % infill for the web, bones and gears, 0.28 mm for the base
Suggested colors: ivory web & bones (with a brown patina!), glow-in-the-dark skulls, orange pumpkins, black coffins and base
You will also need
paper clips (skull jaw hinges) and a bit of 1.75 mm filament (pumpkin and coffin hinges)
super glue, a lighter (to slightly melt pin and rod ends), sandpaper, a white marker for details
optional: battery LED lights (tea lights or a small LED string)
Included
33 numbered STL files (the quantity is in the file name) and 10 × 3MF plates
A step-by-step LEGO-style assembly guide (PDF) with a parts catalog and print times – plus the full Bonehollow story 🕯
Happy Halloween! 🎃
