1 / 5
Truckee Signal Bridge – N Scale 1:160 Cantilever with LED Signal Heads — image 1
1 / 5

Truckee Signal Bridge – N Scale 1:160 Cantilever with LED Signal Heads

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

N-scale Truckee-style signal cantilever with mesh walkways, wiring bores and optional dual LED signal heads.

Rating
0 / 5
Likes
2
Downloads
16
Makes
0
Views
71
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Share Alike

A detailed N-scale (1:160) four-post signal cantilever inspired by the West Truckee railroad scene. Designed in FreeCAD for fine-detail resin printing, with a one-piece arm, tower and foundation and separate optional dual deep-hood signal heads.

The structure uses manufacturer dimensional references and photographic inspiration, with enlarged fine members and wiring features for printing. It is an interpretation, not a verified exact replica of Union Pacific’s as-built structure.

Features

  • One-piece structural frame with a 15 × 15 × 2 mm foundation pad.

  • Two open diamond-mesh walkways with reinforcing underframes.

  • Tower and platform ladders, guardrails, bracing, connection plates and bolt details.

  • Four optional signal positions: two upper and two lower.

  • Continuous 0.90 mm wiring bores through both front tower legs.

  • External arm wiring routes with short transverse wire ports.

  • Separate dual deep-hood target faces and LED boxes with glue tabs, planned around two nominal 0603 LEDs per head.

What to print

Print Tower_N160_revA.stl once. Despite the filename, it contains the complete arm, tower and foundation.

For each installed signal head, print:

  • One DualDeepHoodTargetCover_N160_revA.stl

  • One DualLEDBoxWithMountTab_N160_revA.stl

The pictured four-head arrangement needs four copies of each, with eight LEDs total if illuminated. The optional wiring coupon is for preliminary print and wire-fit checks.

Import in millimeters at 100% scale; the files are already scaled to 1:160. Parts retain assembly coordinates, so arrange them in the slicer. No supports are included. STEP and FreeCAD files are provided for inspection and modification.

Printing and assembly

Developed for an Elegoo Saturn 4 Ultra 16K using Elegoo ABS-Like 3.0 Pro resin. The fine walkways and rails need careful support placement and removal. No FDM print settings or successful FDM result are provided.

Test the wiring coupon and a signal-head pair first. The wiring plan uses 40 AWG enamel-insulated magnet wire, with separate eight-conductor bundles for the upper and lower heads. Actual wire insulation diameter, solder joints and LED fit need checking. Use suitable current-limiting resistors for the LEDs.

Route wires through the front legs, out the side ports, then behind the front arm rails beneath the walkways. Glue the assembled heads to the mounting pads.

Check track centers and rolling-stock clearance before fixing the foundation to your layout. The 53.90 mm mast-base-to-arm-underside dimension is not a top-of-rail clearance rating.

Revision and testing status

Rev A, updated October 9, 2026.

Earlier versions were printed and revealed fragile areas during support removal. This release adds walkway reinforcement and revised wiring details. Its CAD and exports passed the recorded geometry checks, but this reinforced release has not yet been physically print-tested. Cured wire fit, LED fit and handling strength remain unverified.

Credits and remix information

The included signal-head parts adapt N Scale Lighted Signals Dual Targets by ajkochev.

The supplied source archive identifies the license as Creative Commons Attribution, without a version number. The target face and hood were rebuilt as editable FreeCAD solids; the LED box was rebuilt with a bottom wire outlet and mounting tab, and matching mounting pads were added to this bridge. Retain this credit with redistributed adaptations.

Structural dimensional reference: TCR Rail Group’s 28 ft four-post wayside cantilever.

Designed in FreeCAD with AI assistance. Makes, constructive feedback and remixes are welcome, especially resin settings, support-removal results and wiring notes.

Tags