1 / 7
SG92R Servo Horns for Model Railroad Turnouts – Single & Dual Arm — image 1
1 / 7

SG92R Servo Horns for Model Railroad Turnouts – Single & Dual Arm

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Single- and dual-arm SG92R turnout servo horns for 0.032-inch music wire, with a 22T spline and fit-test coupon.

Rating
0 / 5
Likes
0
Downloads
4
Makes
0
Views
16
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Single- and dual-arm servo horns designed for model railroad turnout linkages using a TowerPro SG92R micro servo and 0.032-inch (0.8128 mm) music wire.

The elevated end blocks position the wire above the servo hub. The dual-arm version has two aligned holes so one straight piece of wire can pass through both blocks. The single-arm version provides the same hub and wire interface in a shorter package.

Included models:

  • Dual-arm horn: 36.20 × 7.40 × 9.00 mm.

  • Single-arm horn: 21.80 × 7.40 × 9.00 mm.

  • 22-tooth spline fit coupon: Test your servo shaft fit before printing a complete horn.

Both versions feature a 22-tooth servo socket, recessed retaining-screw seat, and 0.90 mm holes for the music wire.

Print the fit coupon first at 100% scale. Confirm that it seats without cracking and that the retaining screw passes through the center opening. Check the finished horn’s wire holes with your actual music wire; a 0.90 mm drill or reamer may be needed to clear printing artifacts.

These horns were designed for the SG92R. Compatibility with other servo models has not been established.

STL files, STEP exports, and editable FreeCAD sources are included. Feedback, makes, and reports of servo fit are welcome!

Tags