Hyundai Ioniq 5 Tray - Magsafe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to print, under console tray for the Ioniq 5 with a Magsafe charger. Like my previous one, this one has a light.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 695
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
OK, I have been sitting on this for a while because I wanted to have a bunch of variations to present for folks. That was holding me back from just posting what I have been happily using for the last year. So here it is.
This is all based on my original model - HERE
Once all printed - dry fit parts to ensure fit everything fits flush and as you like it. Also I use a piece of tape (3M VHB) to hold the magsafe in place. I bond the parts together with CA/ Super Glue.
Parts:
Apple Magsafe - LINK - It uses the Gen 1 Magsafe but Gen 2 (linked) should work - might need to shim things a little for the slightly smaller thickness.
Uses a magnet ring to stabilize the phone. The one I used is inexpensive and from AliExpress
Also used 2 large Command strips to hold in place - work great and come off clean - Amazon
Light: LINK
USBc Female to Female: LINK
USBc Right Angle Cable: LINK
If you need help printing or sourcing a tray, let me know and we can sort something out.
-----------------------------------------------
Note: The interiors of cars can get very warm in the summer. Select your printing material accordingly.