Caulking Nozzle Holder – 8 Clips, Screw Mounted
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact 190 mm rail for eight caulking nozzles, with three countersunk mounting holes for 3 mm screws.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 27
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A compact holder to keep spare caulking nozzles organised and easy to grab. Designed for the side of a wooden storage cabinet in my work van.
The nozzles clip in from the front and hang with their tips pointing down.
Features
Holds eight caulking nozzles
Overall dimensions: approximately 190 × 25.5 × 24 mm
Clip spacing: 23 mm centre to centre
Three countersunk mounting holes for 3 mm screws
3.4 mm screw clearance holes with 90° countersinks, up to 6.5 mm head diameter
STL for printing and STEP for modification included
Nozzle compatibility
Designed around nozzles with a measured base outside diameter of 16.42 mm. The clips have a nominal inside diameter of 16.62 mm.
Nozzle sizes vary between brands. A single test clip has been printed and confirmed to fit my nozzles; the complete eight-clip rail has not yet been physically tested.
Suggested print settings
PETG
0.4 mm nozzle
0.20 mm layer height
4 perimeters
5 top and bottom layers
30% gyroid infill
No supports
Print in the supplied orientation, with the flat underside on the bed
Keep the scale at 100%
Use the temperature and cooling settings recommended for your PETG and printer.
Mounting
Attach using three 3 mm countersunk wood screws. Check the screw head diameter and choose a length suitable for your mounting surface.
The backplate is 4 mm thick. For my 12 mm wooden cabinet wall, 3 × 12 mm screws provide approximately 8 mm of penetration when seated flush. Tighten gently.