Rising Dracula Coffin - Press the Bat Button and the Count Sits Bolt Upright (No Supports)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Press the bat button on the coffin lid and Count Dracula sits bolt upright in his coffin. Let go and he lies back down.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 19
- Makes
- 0
- Views
- 194
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Autumn & Halloween
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
"Press if you dare." Push the bat button on the closed half of the coffin lid and Count Dracula sits bolt upright, staring at you over the edge of his coffin. Let go and he slowly lies back down on his tufted pillow. A great desk toy and a lovely jump for the first person who presses it.
HOW IT WORKS
• Dracula is a see-saw. He turns on an axle through the coffin walls, and a short lever behind his hips sits hidden under the closed half of the lid.
• The button pushes the lever down and he sits up 60 degrees. His own weight brings him back down and lifts the button again.
• The button travel is worked out so it bottoms out on the lid exactly when he is fully up, so he can't be pushed too far.
PRINTING
• One plate, 5 parts, no supports.
• The 3MF is set up for 5 colours: brown coffin, black Dracula with a white face and hands, red button, gold axle (the nail head).
• One colour? Print Dracula in black and swap to white at 11.0 mm for the face and hands.
• Bambu Studio: 4 h 12 and 87 g.
ASSEMBLY
Lay Dracula in the coffin with his head on the pillow.
2. Push the axle in from the side with the larger hole, through his hips and into the far wall (it's a snug fit there).
3. Drop the button into the lid and fit the lid on the foot end; its lip goes inside the walls.
CUSTOMIZE (OpenSCAD)
The clearance on the axle and the button.