1 / 6
Coreless Rubik’s Cube – T-Track Mechanism | Print-in-Place WIP v1 — image 1
1 / 6

Coreless Rubik’s Cube – T-Track Mechanism | Print-in-Place WIP v1

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Coreless, print-in-place Rubik’s Cube featuring an integrated T-track mechanism. No assembly required!

Rating
0 / 5
Likes
2
Downloads
23
Makes
1
Views
128
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

🧩 Coreless Rubik’s Cube – Experimental T-Track Mechanism

A different approach to the classic Rubik’s Cube: an experimental, coreless, print-in-place design built around a custom integrated T-track mechanism.

Unlike a traditional Rubik’s Cube, this design has no central core. Instead, an internal track system is intended to keep the rotating layers connected while guiding their movement.

The model demonstrates a possible way to create a coreless mechanical puzzle using print-in-place 3D printing. However, although the mechanism is designed to move, the cube has not yet been validated as a reliably usable puzzle.

Because the design relies on complex internal geometry and print-in-place clearances, some features must be printed with limited or no direct support. Depending on the printer, material, and slicer settings, parts may fuse together, internal tracks may print imperfectly, or the mechanism may not move as intended.

No separate assembly is required by design — but successful printing and freeing of the mechanism are not guaranteed.

This is an ongoing experiment, and the goal is to explore what is possible, identify the current limitations, and improve the design together with the 3D printing community.

⚙ Design Features

  • Coreless architecture: No traditional central core.

  • Integrated T-track mechanism: Internal tracks designed to guide and retain the rotating layers.

  • Print-in-place concept: The entire mechanism is designed to be printed as a single assembly.

  • Integrated moving parts: The geometry aims to keep the components connected while allowing relative movement.

  • Multicolor potential: Printers with multicolor capabilities may allow different parts to be assigned different colors in the slicer, depending on the workflow and file format.

These are the design objectives; actual results may vary, and the mechanism is still experimental.

🖨 Printing Information

  • Printing method: Print-in-place

  • Designed clearance: 0.35 mm

  • Assembly: No separate assembly is intended

  • Supports: The internal geometry includes areas that may be printed with limited or no direct support

  • Multicolor printing: Optional, depending on printer capabilities and slicer support

The 0.35 mm clearance is the current design value, not a guarantee of successful separation. Actual clearances may differ due to printer calibration, material behavior, extrusion settings, cooling, first-layer expansion, and dimensional accuracy.

For initial testing, use a well-calibrated printer and avoid excessive material flow. Pay particular attention to first-layer expansion and the small gaps between moving parts.

Since some internal features may be difficult to print cleanly, a successful print cannot be guaranteed on every machine.

🔓 Attempting to Free the Mechanism

If the cube finishes printing, inspect it carefully before attempting to move the layers.

1. Inspect the print

Allow the model to cool completely. Check the visible gaps for fused areas, strings, or other obstructions. Remove only accessible debris, without forcing tools into the internal tracks.

2. Test the initial movement gently

Hold the cube securely and try a small, controlled rotation of one layer. Some resistance may occur, but the mechanism should not be forced.

If the layer is firmly locked, or if the structure begins to deform, stop. Excessive force may damage the integrated tracks or connecting features.

3. Check movement along each available axis

If the initial movement is successful, gradually test the other axes with small back-and-forth rotations. Increase the range of motion only if the mechanism allows it without excessive resistance.

4. Evaluate the result

The mechanism may become easier to move as the printed contact surfaces separate. However, some prints may remain stiff or fused and may not become freely movable without changes to the design or printing parameters.

The purpose of this step is also to identify where the current geometry needs improvement, not to guarantee that every printed cube can be freed.

💡 Troubleshooting and Improvement Ideas

If the mechanism does not move as intended, the cause may be related to:

  • Fused contact points: Insufficient effective clearance or material spreading.

  • Poorly printed internal features: Unsupported areas, sagging, or imperfect bridging.

  • Dimensional inaccuracies: Printer calibration, extrusion, or material shrinkage.

  • First-layer expansion: Gaps near the build plate may close up.

  • Track geometry: The current design may need adjustments to clearances, contact surfaces, or retaining features.

If you encounter a problem, please consider sharing your printer model, material, nozzle size, layer height, slicer settings, and a description or photo of the affected area. This information can help identify the cause and guide future revisions.

Lubrication is not a guaranteed solution for fused parts. Before testing any lubricant, it is better to establish whether the mechanism has printed correctly and whether the parts are actually separated.

🧪 Test Your Printer’s Tolerances First

Before printing the complete cube, you can try printing a single layer or a suitable section of the model, if your slicer allows it.

The bottom layer may be a useful starting point, but it will not necessarily reproduce the printing conditions of every internal feature. Unsupported sections and more complex track geometry may behave differently.

Look for clean gaps, well-defined surfaces, and areas where adjacent parts have not fused together.

If the test reveals closed gaps or fused features, consider adjusting the relevant slicer settings or printer calibration before attempting the full model. Future design revisions may also be needed to make the mechanism more tolerant of different printers.

⚠ Important Notes

This is an experimental mechanical design, intended to explore the possibilities and limitations of coreless, print-in-place mechanisms.

  • The cube is designed to form a single printed assembly, but successful separation of all moving parts is not guaranteed.

  • The mechanism has not yet been validated as a reliably usable Rubik’s Cube or as a smooth, durable puzzle.

  • Some internal features may print poorly or fuse together because of the limitations of print-in-place manufacturing.

  • Do not force stuck layers or attempt to disassemble the integrated mechanism. Doing so may damage the model.

  • Results from successful and unsuccessful prints are both valuable for understanding and improving the design.

🤝 Let’s Improve It Together!

The main goal of this project is to explore how far print-in-place 3D printing can be pushed when designing a coreless mechanical puzzle.

The current version is an experiment, not a finished or validated product. There are still challenges to solve, especially around internal clearances, unsupported geometry, reliable separation of moving parts, and smooth rotation.

I would love to collaborate with other makers and designers to improve the mechanism. If you print the model, please share your results, observations, suggested modifications, and any design changes that help it work more reliably.

Both successful prints and failed attempts can teach us something useful.

Let’s experiment, learn, and improve the design together.

Happy printing! 🧩

Tags