1 / 1
Timeskip Brook glasses-One Piece
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed to print at 100% scale and work with Valhalic's model on Maker world.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 32
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution — Noncommercial
Designed to print at 100% scale and work with Valhalic's model on Maker world.
drill small holes where the end of the spade is on the sides, insert sturdy/thin wire and glue. Wire slots into the elastic holes on the harness to bend in the inside and can be positioned, small EVA foam on nose area is recommended to friction hold the glasses on and prevent scratching.
Lenses have to be glued and made yourself, depending on how long the glasses/wire are from the forehead , the lenses may pop off or bend.