ZWO ASI533MC Pro Adapter Dust Cap – Push Fit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Push-fit dust cap for a 50.65 mm adapter on the ASI533MC Pro. Fit-tested, support-free, with clearance test rings.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 14
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution
A simple push-fit storage dust cap for the adapter left attached to a ZWO ASI533MC Pro camera. The printed cap shown in the cover photo has been physically tested and fits the original measured adapter perfectly.
Compatibility
Designed around an adapter with approximately 50.65 mm outside diameter and 11 mm exposed height. Check your adapter before printing; other adapters and camera configurations may differ.
Dimensions
Internal diameter: 51.05 mm
Internal depth: 12 mm
Roof and wall thickness: 2 mm
Overall height: 14 mm
Grip flange diameter: 57.05 mm
The cap seats against the camera front shoulder, leaving nominal 1 mm clearance above the measured adapter lip.
Suggested print settings
Print with the closed flat face on the bed and the opening facing upward. No supports required. Start with 0.2 mm layers, 3–4 walls and PLA or PETG. These are suggested settings; fit depends on material and printer calibration.
Files included
ASI533_MC_Pro_Adapter_Dust_Cap.stl: full cap, same geometry as the tested version.
Fit_Ring_ID_50.85.stl: tighter clearance test.
Fit_Ring_ID_51.05.stl: nominal clearance test.
Fit_Ring_ID_51.25.stl: looser clearance test.
ASI533_Dust_Cap.scad: editable parametric source; part=0 exports the cap, parts 1–3 export the test rings.
Print the nominal test ring first and try it gently on the outside of the adapter. Adjust the cap clearance in the source if your printer needs a different fit. Clean away loose filament and debris before fitting. Never force the cap or let it contact the optical window.
This is a dust cover for storage, not an airtight or waterproof seal. Fit confirmed on the pictured setup; universal compatibility is not claimed.
