1 / 2
Flat Multi-color Bed Plate for Rook MK1.1, Minimal color changes/waste
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This plate covers the top of the electronics for the Rook MK1.1 3D printer.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 6
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I wanted a flat, two color plate in one model with the fewest color swaps possible, and this is the result. The logo is split into separate objects for easy filament selection in your slicer. The logo objects are only 0.2mm thick, so you will probably want to print with that layer height. Printed face up, it only requires one color change. If you print it face down, it will take two. Also there is nothing stopping you from using a different color for each element of the Rook logo.