1 / 3
Škoda kouzla, které padne vedle remix - removable token trays and colour badges — image 1
1 / 3

Škoda kouzla, které padne vedle remix - removable token trays and colour badges

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

4 removable token trays for the sleeved-card insert: larger heart tray, smaller diamond tray, and separate colour badges

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
11
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

This remix adds practical lift-out token storage to Johny86's sleeved-card insert for Skoda kouzla, ktere padne vedle and its expansion.

Separate badges print face-down: the colour detail is confined to the first 0.4 mm, with black backing above it. This limits colour-change waste compared with printing symbols into tall upright tray walls. Glue each badge into its shallow front recess after printing.

FILES AND PRINTING

Print one redesigned base, one of each tray, and one of each badge. If you already have the redesigned base, you only need the new trays and badges.

The 2-plate Bambu Studio project contains ONLY trays and badges, configured for P1S / 0.4 mm nozzle / PLA / textured PEI / 0.20 mm layers / supports off. Plate 1 is the four trays; plate 2 the four multipart colour badges. Assign black, red, white and blue to matching AMS filaments, verify material profiles and reslice before printing. The base is provided separately as an STL.

Use three walls, 10% gyroid, four top/bottom layers; tray plate has a 4 mm brim. Badges need no supports or brim. A tiny amount of compatible glue fixes each badge into its recess.

COMPATIBILITY

These trays are intended for the redesigned base included here. Their width and depth also fit the supplied original v10 insert, but its thicker floor raises their tops 0.4 mm above the original insert envelope. Lid clearance is unverified, and the original full-height front wall covers the badges and reduces grip access. This is not advertised as a flush-fit upgrade for the unchanged original base.

CREDIT AND LICENSE

Remixed from Johny86 (@JanSvehla_1226841):

https://www.printables.com/model/1247206-skoda-kouzla-ktere-padne-vedle-rozsireni-na-obalen

Original title: Skoda kouzla, ktere padne vedle + rozsireni na obalene karty (INSERT 2).

Changes are described above. Shared under the same Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International license (CC BY-NC-SA 4.0):

https://creativecommons.org/licenses/by-nc-sa/4.0/