yellow hobby motor build platform
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wasn't pleased with the acrylic build platform that came with my kit, so I designed this. It is just a basic starting…
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 62
- Makes
- 1
- Views
- 466
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Wasn't pleased with the acrylic build platform that came with my kit, so I designed this. It is just a basic starting point with more mounting options.
Wheels are at a 15 degree angle to the chassis giving the car an off set stance. It can be used in either orientation depending if you want it high or low. When positioned with the chassis higher, there is plenty of room underneath for batteries.
Dimensions are 88mm wide + 150 mm long
All holes are m3 sized
There are 9 mounting holes in the center cross members that are 25mm apart on center
The five holes on the front and back are spaced at 15mm on center.
There are also four holes on the side that are spaced at 25 mm on center. The outer two on each side are behind the motor, but can still be used for mounting a batter holder underneath.
Print Settings
Printer:
modified two-up
Rafts:
No
Supports:
No
Resolution:
.3 mm layers
Infill:
20%
Category: R/C Vehicles