1 / 2
Milescraft GrabberPRO Push Block TPU replacement pad
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
replacement TPU gripper pad ½"
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 10
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement TPU pad for the Milescraft GrabberPRO Push Block. It is ½" wide, but you can adjust it in the slicer for other sizes.
The original pad uses super strong adhesive, and it's difficult to remove. I carefully cut off my damaged pad with a razor blade, sanded the surface, and then attached the new pad with contact cement.
Printed in Overture 95A TPU. Print it "on edge" so that the fuzzy skin will print along the vertical face.