1 / 4
Adjustable Juice Groove Jig: Printed Corners for an MDF Router Template, Any Board Size — image 1
1 / 4

Adjustable Juice Groove Jig: Printed Corners for an MDF Router Template, Any Board Size

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Printed corners plus MDF rails make a precise juice groove template for any board. Works with a guide or bearing bit.

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
19
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Cut perfect juice grooves on any size of cutting board, using four strips of MDF and either your router's template guide or a top-bearing bit.

How it works: print four corner bases and four fillets, and cut four rails from MDF or plywood.

  • Corner bases: hook onto the board's corners and set how far in the groove is.

  • Fillets: give the template a precise round corner, and line the rails up automatically.

  • Rails: laid pinwheel-style, so one set of long rails works for every board size you make.

Why it's precise: most juice-groove jigs rely on your router's base plate, so the inset depends on which router you own. This one runs a guide bushing or a bit's bearing along the template edge, so the groove's distance from the edge and its corner radius come out exactly as the tables say, on any router.

  • With a top-bearing bit: the groove's outer edge sits exactly on the template edge, with no maths. That suits trim routers that can't take guides, too.

  • With a template guide: use the tables below for 13, 17, 24 and 30 mm guides.

What's included

  • Corner bases for 5 template offsets (5, 7.5, 10, 12.5 and 15 mm)

  • Fillets in 5 corner radii (20 to 40 mm), each in two heights for 12–15 mm or 16–19 mm rails

  • 2 mm rail pads (go under long rails mid-span)

Groove centre inset from the board edge (mm), by guide and corner base

  • 13 mm guide: e5 11.5 · e7.5 14 · e10 16.5 · e12.5 19 · e15 21.5

  • 17 mm guide: e5 13.5 · e7.5 16 · e10 18.5 · e12.5 21 · e15 23.5

  • 24 mm guide: e5 17 · e7.5 19.5 · e10 22 · e12.5 24.5 · e15 27

  • 30 mm guide: e5 20 · e7.5 22.5 · e10 25 · e12.5 27.5 · e15 30

Groove centre corner radius (mm), by guide and fillet

  • 13 mm guide: r20 13.5 · r25 18.5 · r30 23.5 · r35 28.5 · r40 33.5

  • 17 mm guide: r20 11.5 · r25 16.5 · r30 21.5 · r35 26.5 · r40 31.5

  • 24 mm guide: r20 8 · r25 13 · r30 18 · r35 23 · r40 28

  • 30 mm guide: r20 5 · r25 10 · r30 15 · r35 20 · r40 25

With a bearing bit (bearing the same size as the cutter): the groove's outer edge is e in from the board edge and its outer corner radius is the fillet radius. The groove centre is e + bit diameter / 2, with a centre corner radius of fillet radius − bit diameter / 2.

You'll also need

  • A plunge router

  • Either a top-bearing round-nose (bowl-and-tray) bit, or a template guide with a core box bit that fits through it

  • 4 strips of MDF or plywood, at least 110 mm wide and as long as your biggest board plus 160 mm

  • Clamps

Routing tips: set the depth stop to groove depth + 2 mm + rail thickness. Plunge mid-side, never at a corner. Feed clockwise (looking down) in 2–3 shallow passes. Boards must be thicker than 13 mm.

Print settings

  • Layer height: 0.2 mm

  • Walls: 3

  • Top / bottom: 4 / 4

  • Infill: 30%

  • Supports: none

  • Material: PETG or PLA (about 80 g for a full set)

  • Orientation: print as exported. Corner bases are upside down with lips up; fillets are upside down with pegs up.

Licence: personal use. Print it for yourself and use it to make boards to sell. Don't resell the files or the printed jig.

Designed by WouldCraft using parametric code written with AI assistance.

Tags