Slotcar / Model Car Display Plinth / Baseplate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a 200x200mm and 240x200 Display Baseplate or Plinth for your Slotcar or (Diecast) Model Cars, 3 versions, 1 seamless.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 20
- Makes
- 1
- Views
- 274
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution
a simple Display Baseplate or Plinth for your Slotcar!
It's been updated, it now comes in two versions:
200x200 for 1:32 / 240x200 for 1:24
Straight
Angled
Angled with Grass and Curbs
All three also have a version without the slot. You could carefully drill a hole and file it/cut it to make one where you want it, or display a car that's not a Slotcar, like a diecast model car.
The Pattern has been made seamless, so you could print 4 of 'm and put them together to create a bigger one! If the plates don't fit your printer: there are reinforcement lines on the bottom, to prevent sagging, chop it up there in your slicer so you can retain an edge as an easy glue strip to put 'm back together.
Don't forget to fit old tyres to your Slotcar so your good ones don't deform, if you plan on storing a car on this long term.