1 / 6
Funny Bone Antennae Headband — image 1
1 / 6

Funny Bone Antennae Headband

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€0.65 – €0.79 net (excluding VAT)

For file: Headband.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.72 excluding VAT (range midpoint).

Weight reported by the author
11 g
Print time reported by the author
37.2 min
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Funny & goofy 3D printed headband with cartoon bone antennae. Perfect for cosplay and costume parties! 🦴🤪😂😂😂😂😂😂

Rating
0 / 5
Likes
6
Downloads
10
Makes
0
Views
73
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Are you tired of being a boring human? Do you need a goofy accessory for your next cosplay or Halloween party? 🥳

Presenting the Bone Antennae Headband! Instead of regular alien feelers, you get two stylized cartoon bones sticking out like antennae. 🤪 It’s an easy-to-print, two-part model with a neat peg system. No complex supports! 💀✨

🛠 Assembly Tips:

• The holes have a 0.2 mm tolerance (8.2 mm hole for an 8.0 mm peg) for a snug fit. 📐

🖨 Recommended Print Settings:

• Material: PETG is highly recommended for the headband (for flexibility). PLA is fine for the bones! 💎🦴

• Orientation: Print the headband flat for maximum strength and zero supports. 🔄

• Infill: 15% - 20% | Perimeters: 3 walls. 🧱💪

Show me your makes! Post your photos, Thx! 📸🤪
(Follow and like?)

________________________________________________________________________________________________________________________________

CZ:

Už tě nebaví být nudným člověkem? Potřebuješ bláznivý doplněk na příští cosplay nebo halloweenskou párty? 🥳

Představuji ti Čelenku s kostěnými tykadly! Místo obyčejných tykadel ti z hlavy budou trčet dvě stylové kreslené kosti. 🤪 Je to snadno tisknutelný model ze dvou částí s jednoduchým spojovacím kolíkem a bez složitých podpěr! 💀✨

🛠 Tipy pro sestavení:

• Otvory mají vůli 0,2 mm (8,2 mm otvor pro 8,0 mm kolík), aby do sebe vše pevně zacvaklo. 📐

🖨 Doporučené nastavení tisku:

• Materiál: Pro čelenku velmi doporučuji pružné PETG (aby nepraskla). Na kosti stačí obyčejné PLA! 💎🦴

• Orientace: Čelenku tisknout naplocho na podložku pro maximální pevnost a tisk zcela bez podpěr. 🔄

• Výplň: 15 % - 20 % | Stěny: 3 vrstvy. 🧱💪

Ukaž svůj výtvor a nahraj fotku z tisku, Díky! 📸🤪

(Follow and lajk?)

Tags