Ender 3 V3 SE/KE 90 degree filament stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount that rotates the stock filament stand to improve accuracy
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
Warning, i am not responsible for any damages this print may cause, use at your own risk
I highly encourage you to use PETG or stronger filament just to be safe
Sorry about that (had to cover my legal grounds). anyway this print basically lets you rotate the stock filament stand on the Creality Ender 3 V3 SE (hasnt been tested on the Ender 3 V3 KE but I'm pretty sure the physical body is the same so it should work)
If you look at other bedslinger printers such as the Bambu A1 the filament will be rolling toward the printer so it doesn't do that annoying thing where the filament spirals down to the toolhead, so this print fixes that.
You will need:

This print (pls PETG or stronger)
Your stock filament stand (or the upgraded Creality one that rolls and has a scale)
An extra screw, i used the extra one that came with the upgraded mount so i dont know what size the screw is :/
An allan wrench or screwdriver
About 20-25 minutes of free time.

Step one:
Slice and Print this model, i recommend slowing it down a bit and using 100% infill.

Step two:
Screw one side of the holder into the thicker side of the mount and secure it with a nut (this one came with the upgraded stand).

Step three:
Screw the stand and mount into the printer.

Step four:
Test out your upgraded stand by printing this filament guide (i didnt make this and the person who did didn't tell me to put it here, i just found it useful).
If you find this model useful feel free to post a make, it lets me improve and gives you prusameters ;)