Wooden Train Track Junctions – Crossing & Switch (IKEA Lillabo / Brio compatible) + online generator

Printable junctions for wooden toy train tracks, compatible with IKEA Lillabo and Brio.

Included:

• 4-way crossing: two straight tracks crossing at 90°

• Crossing with a curve: crossing plus a 90° curve (switch)

• Double crossing: two parallel tracks crossing two parallel tracks

Need a different layout? Design your own for free at https://www.junctionmaker.com. Pick a circle or a square, click the points you want to connect, choose male or female connectors, check it in 3D and download the STL. Works in the browser, no sign-up, in 8 languages.

Features:

• Connector sizes measured on real tracks that were printed and tested many times

• Sloped groove walls (8 mm top / 5 mm bottom) and 1 mm chamfers, so trains roll smoothly

• Chamfered male pegs for easy connecting

• All sizes can be adjusted in the generator if your tracks differ

Print settings

• Material: PLA (PETG works too)

• Layer height: 0.2 mm

• Infill: 15–20 %

• Walls: 3

• Supports: none

• Orientation: flat side down, as exported

• Tip: print a small piece first to check how the connectors fit your tracks

Not affiliated with IKEA or Brio. Names are only used to describe compatibility.

CZ
Tisknutelné křižovatky pro dřevěné vláčkodráhy, kompatibilní s IKEA Lillabo a Brio.

V balíčku: křížení, křížení s obloukem (výhybka) a dvojité křížení. Jiné rozložení si zdarma navrhneš na https://www.junctionmaker.com: vybereš body, nastavíš samce a samici, zkontroluješ model ve 3D a stáhneš STL.

Tisk: PLA, vrstva 0,2 mm, výplň 15–20 %, 3 stěny, bez podpor, rovnou stranou dolů. Nejsme spojeni s IKEA ani Brio, názvy uvádíme jen kvůli kompatibilitě.