Heavy-duty Hanger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Heavy-duty Hanger for body armor/plate carrier
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Heavy-duty hanger, inspaired by Tough Hook Tactical Hanger, but decidet to make it myself for my own plate carrier, reinforced with stiffening ribs for heavy weigth.
It can be stored in a regular closet, or turned upside down and carried by the handle.
Weight
Plate carrier on photo weight about 7-8 kg (plates&carrier only)
Size
Little bit more than 40 sm wide x 20 sm high x 2.5 sm thick, size for not standart print plate so made it with 3 parts.
Print and assemble
Recommended printing material: PETG.
Settings: 5 walls, 10–15% infill (use a honeycomb pattern for strength); layer height is your choice—I used 0.3 mm.
To connect it, better use 4xThreaded Inserts for 4x M5x20 screws