PTFE connector for eSUN eBOX PRO
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mod to put a bowden pneumatic coupler in the eSun eBox Pro drybox.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 1
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an adapter that uses a PC4-M10 fitting with a seat at the end of the coupler for a reverse bowden tube to screw on, to prevent the tube from moving further in.
This mod is made for the ESUN EBOX PRO filament drybox.
What This Mod Solves
Replacing the flimsy rubber grommet: instead of threading your filament through the loose stock silicone/rubber plugs, this gives a rigid mechanical structure that threads tightly into the eBOX Pro's chassis.
Firm PTFE tube grasp: it allows to lock a standard 4mm Outer Diameter (OD) PTFE Bowden tube firmly into the exterior side of the nut. This fully encloses the filament path from the dry box to your printer extruder, ensuring no moisture hits the filament during long prints.