1 / 2
HobbyPlus Speck-B Receiver Tray
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Receiver tray if you aren't using the stock battery or receiver.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 9
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Receiver tray if you aren't using the stock battery or receiver.
I'm using a HappyModel ExpressLRS EPW6 2.4GHz ELRS 6CH PWM receiver and an external battery with my HobbyPlus Speck-B. I also have a DasMikro Gyro V6 installed. Using this, I can attach the electronics to this model using foam tape, t7000, or similar and securely drop them into place using the mounting designed for the receiver.
Print with supports in the orientation provided (or use your own judgement). I printed at 0.2 with PLA.