DIY Spot Welder Parts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printed parts for construct a spot welder. The code for arduino is in the .cpp file (rename to .ino if you prefer use…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 32
- Makes
- 0
- Views
- 441
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed parts for construct a spot welder.
The code for arduino is in the .cpp file (rename to .ino if you prefer use Arduino IDE)
I drew the arm in 3D for reference only. I do not recommend printing it, preferably use a piece of wood.
The box you can develop freely or use some ready. I made mine from a wardrobe door with the dimensions: 23cmx17cmx12cm.
To see how to prepare the microwave transformer, I suggest consulting some videos named "diy spot welder" on Youtube.
But basically, you should pull out all the secondary transformer and place two turns of 25mm2 wire in place.
Category: DIY