1 / 5
Coffin Trinket Box — put a name on it, no supports — image 1
1 / 5

Coffin Trinket Box — put a name on it, no supports

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A six-sided coffin with a lid that drops into a rebate, for rings, dice, guitar picks, or whatever else wants a home...

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
6
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

A six-sided coffin with a lid that drops into a rebate, for rings, dice, guitar picks, or whatever else wants a home in October. Change the text on the lid and it stops being a prop and becomes a present.

Both parts print flat with nothing overhanging anything, and that is what the rebate is for. The usual way to make a lid is a rim on its underside that plugs into the box, and that rim leaves a ledge running right round the lid with nothing beneath it — a support-free model that quietly needs support. Here the step is cut into the box instead, where it faces upwards and prints dry, and the lid is left as a plain plate.

The lid stands 1.5 mm proud of the rebate on purpose. Flush is prettier in a drawing and useless in the hand; you need something to get a fingernail under. It also sits 1.65 mm inside the box outline, so there is a shadow line round it rather than a seam that has to be perfect.

Everything on the lid is raised, not cut: the panel, the border line and the lettering. Raised means the printer lays it down on a surface that is already there, so it comes out as crisp as the rest of the top face. Cut lettering on a top face is at the mercy of how your slicer handles a 1 mm deep pocket.

The text is clipped to the panel it stands on. Any estimate of how wide a string will render is only an estimate, and a letter hanging over the edge of the panel is a letter standing on a 1.2 mm cliff. So it is clipped rather than guessed — put a long name in and it will be trimmed at the panel edge instead of coming out broken.

Parametric. Length, shoulder, head and foot widths, where the shoulders sit along the length, height, wall, the rebate, the lid, the panel and border, and the text with its size and position. Print the lid in a second filament and it reads as inlay.

Printing. No support, no raft. 0.2 mm layers, 3 walls, 15% infill. Both parts fit one plate: measured on an A1 in PLA at 0.2 mm, the pair comes to 1 h 37 min and 79.7 g. You do not have to switch auto-support off for this one - there is nothing in either part for it to catch on.

Tags