Parkside PTSS 1200 Plunge Saw to Kärcher WD3 Hose Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This adapter connects a Parkside PTSS 1200 plunge saw directly to a Kärcher WD3 vacuum hose
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 3
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Parkside PTSS 1200 Plunge Saw to Kärcher WD3 Hose Adapter
This adapter connects a Parkside PTSS 1200 plunge saw directly to a Kärcher WD3 vacuum hose. It is one solid part, so you don’t need tape, clamps or extra adapters.
The top is an angled camlock fitting that goes onto the saw’s dust outlet. The bottom is a Kärcher WD3 hose connector that the hose screws or clicks into, as it would on the original Kärcher accessories.
Dimensions
Approx. Ø 57 × 78 mm
Print settings (suggested)
Material: PETG recommended, PLA also works
Orientation: Kärcher end down on the bed
Supports: tree
Walls: 3–4 perimeters
Infill: 20–30 %
