Tonneau Cover Prop Rod Retention Clip, 6, 8 or 10 mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A screw-down U-jaw clip that holds a stowed tonneau cover prop rod so it stops rattling. Three rod sizes included.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 5
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a small screw-down clip with an open U-shaped jaw that holds a round prop rod, the rod that props a tonneau or truck-bed cover open, when it is stowed, so it stops rattling. Screw the flat base to the cover or rail with two small screws, then push the rod into the jaw.
Variants are included for 6, 8 and 10 mm rods. Measure your rod with calipers and choose the closest size. The parametric source is included if you want a different diameter.
Dimensions: the jaw opening is 85% of the rod diameter so the rod snaps past it, jaw height is the rod diameter plus 6 mm, jaw wall 3 mm, outer lip rounding 1.5 mm and inner lip 1 mm. The base is 40 x 20 x 3 mm with two 3.5 mm holes 28 mm apart.
Print settings: PETG for interior use, or ASA for outdoor or sun exposure. 0.2 mm layers, 4 walls, 40% infill, no supports. Print as exported, with the jaw axis pointing straight up so the base stands on its edge. Every layer is then the full U profile, so the lips flex along the layers instead of delaminating, and there are no overhangs.
This is a free design offered as-is, with no guarantee of fit, and it has not been tested on the original hardware. Check the rod diameter and mounting spot before printing.
Don't have a printer? PartRevive prints this and ships it: https://jdinneen.github.io/partrevive/parts/tonneau-prop-rod-clip/
