Myna Bird Figurine on Stump, Desk Decor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A common myna caught mid-glance, perched on a short weathered stump with a flat round base.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 12
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Animals
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A common myna caught mid-glance, perched on a short weathered stump with a flat round base. Chunky feather shapes keep the detail printable at desk size.
PRINT NOTES
Size: 60 x 70 x 120 mm, scalable in the slicer
Printer/profile: Bambu Lab A1 mini, 0.4 nozzle, 0.12 mm fine, PLA
Supports: yes. Use NORMAL (grid) supports, not tree. The tail hangs about 16 mm past the edge of the base, so paint a support enforcer under the whole tail underside.
Print time: about 2h 50m
Filament: about 33 g
Single color, AMS not required. A brim is recommended for the tall, slim stance.
Tip: slow the outer wall to about 60 mm/s and use 3 walls for sturdier legs.
ABOUT THIS MODEL
Designed with AI assistance (Tripo AI) and prepared for printing by me: repaired, scaled, flat base, sliced. The pictures shown are AI concept renders of the design. Real photos of the printed piece will replace them.