Double layer Skådis Hinge Extention
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This extention hinge allows you to double your Skådis Storage space.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 8
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This hinge allows you to attach a half Skådis sheet infront of your wall mounted one, doubling your total storage space. Perfect for small workshops or if extra space is needed.
Skådis attachment can be added to both sides of the small Skådis board.
The pegboard in the picture is the 56x56 cm one, with one of the same size cut in two. For the 76cm wide board, a 36cm wide board can be used as the small one.
Available with depth of both 100 and 150 mm. The one in the pictures is 150mm.
Fasteners needed: (recommended length
8 pcs | M4 16mm |
8pcs | M4 26mm |
16pcs | M4 nuts |
Print instructions:
Material: | PETG |
Layer Height: | 0.2 mm |
Perimiters: | 3 |
Infill: | 10% |
Brim is recommended | |
Prints supportless with the following exception:
Use organic Supports, and apply them at the 4 blue markings. The picture shows the model from below.
Sorry for not having enough time to hang the pegboard before taking pictures!