1 / 8
Rotary Clothes Line Dryer Clip for Retractaline Windy Dryers — image 1
1 / 8

Rotary Clothes Line Dryer Clip for Retractaline Windy Dryers

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A replacement clip for the rotary clothes line wire holder on (specifically) the South African Retractaline Breezi Dryer

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
4
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a replacement clip for the rotary clothes line wire holder on (specifically) the South African Retractaline Breezi Dry Washing Line (the green 15mm diameter tubular arms).

 The original clips tend to break when the line is being replaced, so these are slightly thicker than the originals, for extra strength.

 These are best printed in filaments that can withstand longterm UV, heat and rain exposure, so use PETG, ASA or PC.

Ideally use the existing screw ( a self-tapping tek screw) or any other available screw that will work with the existing hole in the metal arm.

 No need for supports.

Dimensions:  39(l) x 15(w) x 7(h)mm

Weight: 2g

 Printed on a Bambulab X1 Carbon (ASA and PC) and Creality CR10S in PETG.

Dimensions:  39(l) x 15(w) x 7(h)mm

5 walls

5 top and bottom layers.

90% infill

Print time: 15 - 25 minutes (machine and settings dependent)

Filament consumed: 2-3g (machine and settings dependent)

No need for supports, but could be used for the screw hole indent.