Werewolf Axe Bottle Opener
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A wall-mounted werewolf in front of a full moon. Push his axe down and the bottle cap pops off.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 4
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
The werewolf’s arm with the axe is a lever hidden behind his body. It turns on a printed pin, so there is no metal hardware apart from two wall screws.
How it works: push a bottle up into the opening under his chest, then swing the axe down. A hidden hook grabs under the cap, a stop holds the other side, and the cap pops off. Picture 3 shows a cutaway.
Made for standard 26 mm crown caps. Size about 15 x 15 cm, 7 cm deep, about 180 g of filament. One colour per part, no AMS needed: moon yellow, core, bust and lever grey, axe silver, eyes yellow.
Assembly: screw the moon and core to the wall with two 4 mm screws, slide the axe head onto the handle, put the lever on the pin, glue the bust onto the core, glue the eyes in.
Note: designed and checked in CAD (fit, clearances and the full lever movement), but not test printed yet.