1 / 2
Google Review Tap Card Counter Easel with Tap-Here Pad (CR80, no supports) — image 1
1 / 2

Google Review Tap Card Counter Easel with Tap-Here Pad (CR80, no supports)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Counter easel that holds a CR80 NFC review tap card at 70° with a tap-here pad. Prints in one piece, no supports.

Rating
0 / 5
Likes
0
Downloads
3
Makes
0
Views
12
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution

Put your review tap card right where people pay. This easel holds a CR80 card (85.6 x 54 mm) in a shallow pocket at 70°, facing whoever is standing at the register. The pocket is 1.5 mm deep and 0.6 mm wider than the card, so cards from 0.8 to 1.2 mm thick drop in and lift out by the top edge. In front of the card sits a raised pad with a recessed wave icon, a wordless cue that shows people where to hold their phone. Nothing has to be glued, and swapping in a new card takes a second. The whole piece prints in one go, base down, with no overhangs past 45°.

Fits standard NFC cards like those from Pocket Factory: https://getpocketfactory.com/?utm_source=printables&utm_medium=referral&utm_campaign=review-tap-card-easel

Files

- review_tap_card_easel.stl: 94.6 x 70 x 49.1 mm, one part

Key dimensions

- Card pocket: 86.2 mm wide, 1.5 mm deep, open at the top, 3 mm ledge under the card

- Card angle: 70° from the counter

- Tap pad: 54 x 22 mm, raised 2 mm, icon recessed 1 mm

Print settings

- Material: PLA or PETG

- Layer height: 0.2 mm

- Walls: 3, infill 15%

- Supports: none. Print flat on the base, as exported.

- Tip: print the pad in a second color with a filament change at 4.0 mm for a two-tone look.

What a review card is (and what it doesn't do): https://getpocketfactory.com/blogs/news/what-is-a-google-review-card?utm_source=printables&utm_medium=organic&utm_campaign=suave&utm_content=google-review-card

Tags