Minibadge display backplate (100mm square boards)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the backplate for the 100x100mm displays (4x4 and safety display) that also allows for interconnecting them.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 3
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is the backplate for the 100x100mm displays (4x4 and safety display) that also allows for interconnecting them. The connections are tight and does take some effort to make them fully connected. First time getting boards in makes a tight connection and does get loser if you remove and add boards back in. Also allows for some customized stands or display options for those interested in making different addons. Will also look at adding a stand and other future additions to this system in the future.
One note is that only the right sided boards can get USB-C power easily while internal ones will need to use the MDNC port (RJ-45 connection on back) GitHub - Herushan/MDNC---Unofficial_minibadge_display_rj45port: Unofficial rj45 port for minibadge displays to interconnect to share power and I2C between minibadge display boards. · GitHub
Do make sure the holders have a small edge at the top inside if flat then the file is old.