1 / 3
misster electronics box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a small container that holds a pump and battery and pcb from parkside
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 7
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Public Domain
This is the container for my project of reusing a broken parkside mister like this one below. The container is 10x10cm and 5.5 cm in height.
Assembling the container will require the electronics from device above and :
1. hot glue
2. 4x m3 screws 15mm long
3. 2x m2.5 screws 4mm long
So first we insert the small pump as shown, it should sit snug .
Then place and hot glue your 3.7 li-ion battery in place as shown:
Third we screw in the small pcb with the two small screws as shown
Finally you screw on the top lid with your 4x m3 screws as shown
Now you can also block int the charging hole with the tpu plug as such
