1 / 9
IKEA MAXIMERA Sink Drawer Organizer (METOD 60×37) – Bottles, Foils, Bags & Dishwasher Tabs — image 1
1 / 9

IKEA MAXIMERA Sink Drawer Organizer (METOD 60×37) – Bottles, Foils, Bags & Dishwasher Tabs

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Organizer set for the IKEA METOD sink drawer (MAXIMERA 60×37): follows the curved sides, max. 12 cm high in the middle.

Rating
0 / 5
Likes
3
Downloads
4
Makes
0
Views
47
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Share Alike

Organizer set for the top drawer of an IKEA METOD sink cabinet with a MAXIMERA drawer, medium, 60×37 cm (same drawer shape as EXCEPTIONELL). Everything prints without supports and is in daily use in my kitchen.

What goes where

  • 4 side boxes (2 per side, 12 cm high): the outer wall follows the curved MAXIMERA side wall (2.5 mm play), the inner wall is straight. For tall cleaning bottles (footprint up to 13.9 × 6.9 cm), a standing roll of bin bags, a round bottle (Ø 6 cm) and slots for bag clips.

  • Foil stack holder (2 halves): aluminium foil and cling film boxes (32 cm) plus a roll of bin bags, stacked in one channel.

  • Paper/compost bag frame: folded compost bags (22 × 13 cm) lie flat in a slot (inside 22.9 × 14.8 × 3.2 cm). A 5 cm strip is open so you can grab the top bag.

  • Dishwasher tab box: sits on two ledges inside the frame above the bag slot, inside 22.4 × 9.3 × 8.4 cm.

  • Clip bin: 2 compartments (4.3 × 14.8 cm) for bag clips.

  • Bridge tray (optional, 2 halves, new): hangs on the walls of the foil holder and the frame and covers the gap between them, e.g. above a pack of freezer bags. 7.5 cm free underneath, inside 15.9 × 8.7 × 4.3 cm per half. This part is new and not printed yet.

The sink sits above the middle of the drawer, so all middle parts are max. 12 cm high (the bridge tray lips add 1.2 mm). Tall bottles only go into the side boxes.

Drawer dimensions used

From online sources, please check your drawer before printing everything: inner width 480 mm at the floor, 520 mm from about 56 mm up, inner depth 310 mm, side height about 120 mm. Tip: print plate 1 (front side boxes) first as a fit test.

Print settings (Bambu Lab P1S, 0.4 mm nozzle, PLA)

  • 0.20 mm layer height, 5 walls (Arachne), 15 % gyroid, no supports, no brim

  • Walls are 2.0 mm, dividers 1.6 mm

  • All parts print standing upright. The 3MF project has 5 plates:

  1. Front side boxes L1 + R1 – 5 h 45 min, 307 g

  2. Back side boxes L2 + R2 + foil holder R – 9 h 29 min, 494 g

  3. Paper-bag frame + foil holder L – 5 h 41 min, 327 g

  4. Dishwasher tab box + clip bin – 6 h 36 min, 366 g

  5. Bridge tray, 2 halves (optional) – 3 h 21 min, 166 g

Total about 31 h and 1.66 kg (2 spools).

Files

side_box_left_front, side_box_left_back_clip_slot, side_box_right_bottle, side_box_right_roll_round_clips, foil_stack_holder_x2 (print 2×), paper_bag_slot_frame, dishwasher_tab_box, bin_clips, bridge_tray_x2 (print 2×), plus the Bambu Studio 3MF project.

Credits

The curve of the drawer side wall was taken from Space-optimized box for Ikea Exceptionell (Maximera) drawer by hoeni (CC BY-SA 4.0). This design is shared under the same license.


Deutsch: Ordnungssystem für die oberste Schublade im IKEA METOD Spülenschrank (MAXIMERA mittel 60×37). Die Seitenboxen folgen der gewölbten Schubladenwand, in der Mitte ist alles max. 12 cm hoch (Spüle). Platz für Putzflaschen, Alu- und Frischhaltefolie, Müllbeutel, flache Biobeutel, Spülmaschinentabs und Tütenclips. PLA, ohne Stützen, 5 Platten für den P1S.

Tags