Click-in Hooks & Bins for Küpper Keyhole Pegboards (37 × 25 mm) – Tool-free, No Supports

Hooks, bins and a glove box holder for Küpper steel pegboards with keyhole slots. Mushroom pegs pass through the round part of each keyhole, then the part slides about 10 mm down and locks behind the steel: no screws, no tools, no tipping, no pulling out.

Features

• Three hooks: 40, 80 and 150 mm reach

• Three bins: S (80 × 45 mm inside), M (117 × 60 mm), L (154 × 80 mm)

• Glove box holder for a standard box of 100 nitrile gloves (115 × 50 mm), dispenser facing you

• Two pegs per hook, four per bin and on the glove box holder

• STEP files included, to adapt the parts to your needs

Print settings

• PETG recommended, 0.2 mm layers, 0.4 mm nozzle

• 3–4 walls, 15–25 % infill

• Prints as shown, no supports: the hook arms lie on the bed and the peg heads are chamfered underneath

• Print Hook 40 first: it is the quickest way to check the fit on your board

Board compatibility

• Küpper keyhole pegboard: 37 mm horizontal pitch, 25 mm vertical pitch

• Keyholes measured at Ø 9.85 mm (round part) with a 4.85 mm slot

• Peg heads are Ø 9 mm on a 4.2 mm neck

Designed with AI assistance (parametric Python script).

En français

Crochets (40, 80 et 150 mm), bacs (S, M, L) et support de boîte de gants pour les panneaux perforés Küpper à trous en serrure (pas de 37 × 25 mm). Les champignons passent dans le rond du trou, la pièce descend d'environ 10 mm et se verrouille derrière la tôle : sans vis ni outil. PETG conseillé, couches de 0,2 mm, 3 à 4 périmètres, 15 à 25 % de remplissage, sans support. Imprimez d'abord le crochet 40 pour vérifier l'ajustement. Fichiers STEP fournis.