SpinDraw – Click Frame Ø180 (base for all SpinDraw discs)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print it once, then collect the discs: the click frame that turns every SpinDraw disc into a drawing game.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The base for every SpinDraw disc. Print it once, then collect the discs!
HOW IT WORKS
1. Put a sheet of paper on the table and lay a SpinDraw disc on it (numbers up).
2. Place the frame over the disc, with the START notch under the ▼ mark.
3. Turn the disc in the direction of the arrow: it clicks on each notch.
4. On each click, trace the slot with the number shown under ▼.
5. After the last number, lift the disc… and the drawing appears!
PRINT SETTINGS
• PLA, 0.2 mm layers, no supports. Already oriented (top face on the bed).
• Size 209 × 209 mm: needs a 250 mm class bed (MK4/MK4S, Core One, XL, Bambu A1/P1S/X1C…).
• Fits every SpinDraw disc Ø180.
Images are 3D renders.